Pearl Abrasive Hexpin Floor Preparation System 15" Hexplate w/Superclutch & 12 Carbide #4 Cutter Pins HEX17CBD4CL

15” Hexplate: Specially designed to be used with 17-18” Buffers. Works with a wide variety of interchangeable pins for Grinding, Sanding and Coating Removal. Spring mounted pins to allow for uneven surfaces.

SUPERCLUTCH™- SAFELY PREVENTS COUPLER BREAKAGE AND BUFFER DAMAGE.

Torque Locks can be locked into place if there is a problem with the clutch disengaging too often because of the job. Simply loosen the screws holding the torque locks and turn the long end under the toothed slip ring. TIGHTEN THE SCREWS!

CAUTION: Coupler will not be protected if torque locks are left in the lockout position

Includes 15” Hexplate, Superclutch and 12 #4 Cutter Pins

Carbide Very Aggressive #4 Hexpin Attachment Complete Set: This set is specially designed and fitted with a replaceable, four sided, abrasion resistant, carbide insert. With 8 Sharp Edges, the #4 is best used to remove thin paint and epoxy from concrete, but works well for other concrete surface removal applications. So aggressive, we recommend that it only be used with the Hexpin® Super Clutch™ plate.

Includes Carbide Holder with Carbide Very Aggressive Chip #4 and Screw (complete)