CMT Flush Trim Router Bit

CMT has designed a series of truly indispensable bits available in a wide range of sizes for your woodworking needs and your most difficult projects. For precision work on laminates or quick template work with excellent finishing.

Shop tips: these bits are excellent for making through mortise. Use a straight bit (711.130.11) to groove the area to make the through mortise. With a drill bit (517.130.31) bore a hole through the wood at one end of the groove. Turn the work piece over to finish the mortise. Use a flush trim bit with a cutting length slightly longer than the fillet, following the groove made on the opposite side of the work piece with the ball bearing guide.

Safety tips: dust and chips from laminate materials are hazardous to your health and safety. Always wear a dust mask and eye protection when routing.

Shop tips: undersized bearing to use after resharpening.
791.062.00 Ø9,3 replace bearing 791.002.00 (Ø9,5) after resharpening
791.063.00 Ø12,5 replace bearing 791.003.00 (Ø12,7) after resharpening

SKU #	S	L	I	D
806.064.11	1/4"	2-1/2"	1"	1/4"					791.035.00
806.095.11	1/4"	2-11/16"	1"	3/8"			990.058.00	990.422.00		991.057.00	791.002.00
806.096.11	1/4"	2-3/16"	1/2"	3/8"			990.058.00	990.422.00		991.057.00	791.002.00
806.127.11	1/4"	2-25/32"	1"	1/2"	791.003.00	990.423.00	990.058.00			991.057.00
806.128.11	1/4"	2-9/32"	1/2"	1/2"	791.003.00	990.423.00	990.058.00			991.057.00
806.627.11	1/2"	3-13/32"	1"	1/2"	791.003.00	990.423.00	990.058.00			991.057.00
806.628.11	1/2"	2-25/32"	1/2"	1/2"	791.003.00	990.423.00	990.058.00			991.057.00
806.629.11	1/2"	3-45/64"	1-1/2"	1/2"	791.003.00	990.423.00	990.058.00			991.057.00
806.630.11	1/2"	4-3/32"	2"	1/2"	791.003.00	990.423.00	990.058.00			991.057.00